TEXIO DL-2060, Instruction Manual

Page: 22 / 152

16
1. Power & Display:

Power: Activates DL-2060 DMM.

Display: Shows model, version & condition by pressing round PREV & NEXT buttons.
2-1. First row without SHIFT button:

DCV: Selects DC voltage measurement.

ACV: Selects AC voltage measurement.

Ω2: Selects 2-wire resistance measurement.

FREQ: Selects frequency measurement.

CONT: Selects the continuity test.

TEMP: Selects RTD temperature measurement.
2-2. First row with SHIFT button:

DCI: Selects DC current measurement.

ACI: Selects AC current measurement.

Ω4: Selects 4-wire resistance measurement.

PERIOD: Selects period measurement.

: Selects diode testing.

TCOUPL: Selects thermocouple temperature measurement.
2-3. Second row without SHIFT button:

FILTER: Enable or disable the digital filter.

DIGITS: Changes resolution.

RATIO: Enables the dcv:dcv ratio function.

%: Calculates the ratio to a target value in percentage.

MIN/MAX: Captures the minimum or maximum readings from the measurement.

NULL: Activates the offset function in order to get the real measured reading.
2-4. Second row with SHIFT button:

STEP: Scans from a channel to the next channel in delayed action when using the
scanner card.

SCAN: Enables scanning function when using the scanner card.

LIMITS: Used for Setting upper and lower limit values for readings.

MX+B: Used for calculating slope. X is the normal display reading. M and B are
constants specified by user for scale factor and offset.

dBm: Used for displaying voltage measurement in dBm power unit.

dB: Used for displaying voltage measurement in decibel unit.
2-5. Third row without SHIFT button:

SINGLE: Manually triggers the multimeter to make measurements.

AUTO TRIGGER: Instructs the multimeter to make measurements continuously.

STORE: Stores a specified number of subsequent readings.

RECALL: Displays stored readings and buffer statistics. Use
◁▷
or
△▽
searching
buttons to toggle between reading number and reading.

LOCAL: Cancels USB or GPIB remote mode.