125
STATus:QUEStionable:EVENt?
Query the Questionable Data event register. The multimeter returns a decimal value which
corresponds to the binary-weighted sum of all bits set in the register.
STATus:PRESet
Clear all bits in the Questionable Data enable register.
*CLS
Clear the Status Byte summary register and all event registers.
*ESE <enable value>
Enable bits in the Standard Event enable register. The selected bits are then reported to the
Status Byte.
*ESE?
Query the Standard Event enable register. The multimeter returns a decimal value which
corresponds to the binary-weighted sum of all bits set in the register.
*ESR?
Query the Standard event register. The multimeter returns a decimal value which corresponds to
the binary-weighted sum of all bits set in the register.
*OPC
Sets the “operation complete” bit (bit 0) in the Standard Event register after the command is
executed.
*OPC?
Returns “1” to the output buffer after the command is executed.
*PSC {0|1}
Power-on status clear. Clear the Status Byte and Standard Event register enable masks when
power is turned on (*PSC 1). When *PSC 0 is in effect, the Status Byte and Standard Event register
enable masks are not cleared when power is turned on. [Stored in non-volatile memory]
*PSC?
Query the power-on status clear setting. Returns “0” (*PSC 0) or “1” (*PSC 1).
*SRE <enable value>
Enable bits in the Status Byte enable register.
Summary of Contents for DL-2060
Page 37: ...31 Figure 3 17 1 2 3 5 5 4...
Page 136: ...130...
Page 137: ...131...
Page 138: ...132 D DL 2060 s Dimension...
