TEXIO DL-2060, Instruction Manual

Page: 104 / 152

98

-108 Parameter not allowed
More parameters were found than needed for the command .

-109 Missing parameter
Not enough parameters were received for the command.

-112 Program mnemonic too long
A command header with too many characters was received.

-113 Undefined header
An invalid command was received.

-121 Invalid character in number
An invalid character was found in the number specified for a parameter value.

-123 Numeric overflow
A numeric parameter with exponent larger than 32000 was found.

-124 Too many digits
A numeric parameter was found whose mantissa contained more than 255 digits,
excluding leading zeros.

-131 Invalid suffix
A suffix was incorrectly specified for a numeric parameter.

-138 Suffix not allowed
A suffix was received following a numeric parameter which does not accept a suffix.

-148 Character not allowed
A discrete parameter was received but a character string or a numeric parameter was
expected.

-151 Invalid string data
An invalid character string was received.

-158 String data not allowed
A character string was received but not allowed for the command.

-160~-168 Block data errors
Block data is not acceptable.