118
ROUTe:TERMinals?
Query the multimeter to determine if the front or rear input terminals are selected. Returns
"FRON" or "REAR"
ROUTe:CLOSe <channel>
Set channels which need to be closed. <The range is from channel 1 to 10 or 20>
ROUTe:CLOSe?
Query channels which were closed.
ROUTe:OPEN
Open all channels.
ROUTe:STATe?
Query
the state. The state 3 means 10ch TC-Card inserted, 2 means 20ch Card inserted, 1 means
10ch Card inserted or 0 means Card not inserted.
ROUTe:SCAN:FUNCtion <channel>,{<funct
ion>|“VOLT:DC”|“VOLT:AC”|“FREQuency”|
“RESistance”|“FRESistance”|“
PERiod
”|“TCOuple”|“TEMPerature”|“NONE”}
Set scanner card’s measurement functions which might be for the VAC, VDC, Frequency, 2-Wire
Resistance, 4-Wire Resistance, Period, Thermocouple, RTD, or disabling the channel.
ROUTe:SCAN:FUNC? <channel>
Query the channel’s function on the scanner card.
ROUTe:SCAN:TIMER?
Read the time interval of scanning.
ROUTe:SCAN:TIMER <value>
Set the time interval of scanning <The unit is second>.
ROUTe:SCAN:COUNT?
Read the number of times of scanning.
ROUTe:SCAN:COUNT <value>
Set the number of times of scanning.
ROUTe:SCAN:STATe?
Query a channel numeric which is being scanned.
Summary of Contents for DL-2060
Page 37: ...31 Figure 3 17 1 2 3 5 5 4...
Page 136: ...130...
Page 137: ...131...
Page 138: ...132 D DL 2060 s Dimension...
