TEXIO DL-2060, Instruction Manual, Page: 86 / 152

80
3.4.9 Initial Mode
The section contains two selections: “DEFAULT” and “SAVE DATA”. You can select “SAVE
DATE” to save the current configuration or select “DEFAULT” to restore the factory value
after restarting DL-2060. The valid range of “SAVE DATA” is listed in
Table 4-5 .
Table 4-5
No. Items of Save Data Contents
1 Continuity Threshold Resistance
2 Diode Boundary Voltage
3 Temperature (RTD)
Sensor
、
Types
、
Units
、
USER define
、
SPRTD
4 Thermocouple Types, Units,Simulated
5 Step & Scan Count, Timer
6 dBm Reference Resistance
7 MX+B Values: M, B
8 Reading Hold Sensitivity Band
9 Input R
DC Input Resistance
10 Interface
USB
、
GPIB ADDR
11 System
Language
、
Beep
How to save the settings
Press MENU and then use
◁
and
▷
to locate “SYSTEM” submenu. Press ENTER to select
it. Again use
◁
and
▷
to locate “INIT MODE” submenu, and then press ENTER to select
it. Use
◁
and
▷
to switch from “SAVE DATA” and “DEFAULT”. Press ENTER on “SAVE
DATA” to save your current setting, or press ENTER on “DEFAULT” to return to default
setting. The locations of the buttons are shown with red rectangle frames in
Figure
4-33 .
Figure 4-33