TEXIO DL-2060, Instruction Manual

Page: 24 / 152

18
Figure 2-17
1.3.2.1 Annunciators at Upper Side
Figure 2-18

ADRS: Indicates the multimeter is controlled via GPIB Interface.

RMT (REMOTE): Indicates the remote state. (USB Interface)

MAN: Indicates the manual range is taken.

TRIG: Shows the single triggering is enabled.

HOLD: Indicates reading hold function is enabled.

MEM: Indicates the using of internal memory.

RATIO: Indicates the dcv:dcv ratio operation.

MATH: Indicates the “MATH” operation is taken.

ERR: Error occurs.

SHIFT: Indicates SHIFT button is pressed.

REAR: The rear panel input terminal is selected for the measurement.

FILT: The digital filter is started.
1.3.2.2 Annunciators at Right Side

4W: Indicates 4 –wire mode is selected for resistance measurement.

●
)
)
) : Indicates the continuity testing is enabled.

: Indicates the diode testing operation is taken.

EXT: Indicates the External Trigger Mode is enabled.

LOCK: Indicates the front panel menu operations is lecked.

OFF: Indicates the front panel display is turned off
Figure 2-19
Upper Row Display
Lower Row Display