81
3.4.10 Language
DL-2060 supports two languages: DEFAULT (DL-2060) and COMPATIBLE (Agilent
34401A).
How to set up the language
Press MENU and then use
◁
and
▷
to locate “SYSTEM” submenu. Press ENTER to select
it. Again use
◁
and
▷
to locate “LANGUAGE” submenu. Press ENTER to select it. Use
◁
and
▷
to switch to DEFAULT (DL-2060) or COMPATIBLE (Agilent 34401A). Press ENTER
on your selection. The locations of the buttons are shown with red rectangle frames in
Figure 4-34
.
Figure 4-34
3.4.11 Error Condition
The error annunciator on the front panel display tells about the error condition of the
multimeter. If there are one or more syntax or hardware errors found, the error
annunciator will be lit to inform user. The multimeter stores errors using the
first-in-first-out (FIFO) order and it records up to 20 errors in the error queue. The first
error detected will be the first error retrieved. Refer to Chapter 5 for the list of error
messages.
※
Note:
The error annunciator will be turned off when you have read the errors in the
memory.
If there is no error found when you check the error queue, the multimeter shows “
NO
ERRORS
”.
If there are more than 20 errors found, the last error in the error queue will be
replaced with “-350”, means too many errors.
Summary of Contents for DL-2060
Page 37: ...31 Figure 3 17 1 2 3 5 5 4...
Page 136: ...130...
Page 137: ...131...
Page 138: ...132 D DL 2060 s Dimension...
