TabletKiosk Sahara NetSlate a525 User Manual Download Page 108

Page: 108 / 173

Chapter 04:

Using Your Sahara NetSlate with Microsoft® Windows® 7

Self Timer selector. Displays timer selection. Tap to cycle through

the options. (Photo mode only)

Off

Two (2) second delay

Ten (10) second delay

Video format (resolution) selector. Displays current video format.

Tap to cycle through the options.

720p (1280x720) <--

supported on rear facing camera only

480p (640x480)

240p (320x240)

Settings Panel

The program's Settings panel gives access to the same controls

available by the Overlay Controls listed above, plus the save loca-

tions for both still photos and video recordings, plus the ability

to put a predetermined time limit on video recordings in order

to save drive space and battery life in the event of an unattended

video recording session.

Simply tap on an

option field in the

panel to make

a change. The

change takes effect

immediately. Tap on

the close icon in the

upper right hand

corner of the panel

to close it.

Summary of Contents for Sahara NetSlate a525














































































































































































Search results

Summary of Contents for Sahara NetSlate a525

Reviews:

Related manuals for Sahara NetSlate a525

Brands by name

Popular brands

TabletKiosk Sahara NetSlate a525, User Manual

Search results

Summary of Contents for Sahara NetSlate a525

Reviews:

Related manuals for Sahara NetSlate a525

Brands by name

Popular brands