Suzuki Samurai 1986, Service Manual

Page: 228 / 482

9-5. DISASSEMBLY
NOTE:
Before disassembling starting motor, be sure to
put match marks at two tocations and
as shown in the figure below so that any possible
mistakes can be avoided.
Commutator end
cover
Fig. 95
1) Remove nut securing the end of field coil
lead to terminal on the head of magnetic
switch.
Fig. 9-6
2) Take off magnetic switch from starting
motor body by removing two mounting
screws.
3) Loosen 2 bolts and 2 screws to remove
commutator end cover.
4) Separate drive housing and armature from
yoke.
Fig. 9-8
5) Draw brushes out of holder.
Fig. 49
6) Draw off over running clutch, as follows:
Draw stop ring toward clutch side.
Remove armature ring and slide off
clutch.
Pinion
Fig. 910
9-6