Suzuki Samurai 1986, Service Manual

Page: 298 / 482

2) Using spring pin remover (special tool), drive
2 spring pins out of front drive shift shaft
and reduction shift shaft
Spring pin
remover :
Fig. 14-24
3) Remove forks and shift shafts.
NOTE:
At this time, locating ball and spring will jump
out of hole, use care not to lose them.
Fig. 14-25
4) Hammer output rear shaft with
a
plastic
hammer to drive it out of center
case.
5) Pull out counter gear,
Remove counter shaft
loosening counter shaft
bearings and spacer.
from center case by
lock plate bolt.
Fig. 14-27
6) Remove input shaft from center case by
hammering thick part of case or input
shaft center with a plastic hammer.
Fig. 14-28
14-10
Fig. 14-26