Suzuki Samurai 1986, Service Manual

Page: 454 / 482

MAINTENANCE
(1) Headlight adjustment
There are two screws (1)and (2)which can be
used for adjustment. Use these screws to
adjust the headlight position for the vertical
and horizontal alignment of each beam.
(2) Head light dimmer switch
Using circuit tester, check each circuit for
continuity by putting tester probe pins to
the terminals shown in Fig. 21-7. With switch
kept in LOW BEAM position, tester should
indicate continuity between terminals and
. Similarly, there should be continuity
between terminals and when in HIGH
BEAM position.
Fig. 21-6
Switch connector
J
Green/Red (Green/Black)
8. Red
2. Green/Yellow 9. Blue/Green
3. Green 10. Brown/Yellow
4. Yellow 11. Red/Blue
5. White/Blue 12. Red/Yellow
6. Yellow/Blue 13. White
Red/White
17 18
14. Yellow/White
15. Blue
16. Blue/Red
Fig. 21-7
17.
Blue/Black
18. Black
19. Blue/White
Combination switch (Lighting switch circuit)
Fig. 27-8
,
21-6