Suzuki Samurai 1986, Service Manual

Page: 286 / 482

7) Apply thread lock agent (THREAD LOCK
CEMENT SUPER 99000-32020)
to thread of reverse gear shift rim bolt,
And tighten rim bolt extension case to
specified torque.
Tightening torque
kg-m
lb-ft
for reverse gear
shift rim bolt
1 4 - 2 0 1 . 4 - 2 . 0 1 0 . 5 - 1 4 . 0
Fig. 13-81
Input Shaft Bearing Retainer
1
2
grease (SUZUKI SUPER GREASE A
99000-25010) to oil seal lip.
Clean surface of retainer to mate with
transmission case and uniformly apply
sealant (SUZUKI BOND No. 1215,
31110).
Fig. 13-82
3) Tighten retainer bolts to specification.
Tightening torque
k g - m
lb-ft
for retainer bolts
18 28 1.8
2.8 13.5 20.0
4) Check transmission input shaft for easy
rotation by hand.
5) Check each select and shift shaft for opera-
tion.
Clutch Release Bearing
Before installing bearing, apply grease (SUZUKI
SUPER GREASE A 99000-25010) to inner
surface of clutch release bearing.
Fig. 13-83
Clutch release bearing
grease (SUZUKI
SUPER GREASE A,
I.D. recess
Input shaft
Before remounting transmission ass’y to engine
and car body, apply grease (SUZUKI SUPER
GREASE I, 99000-25210) to input shaft.
Fig. 13-84
1. Apply grease
Others
Upon completion of reassembly and installa-
tion of transmission ass’y in car body, pour
specified amount of transmission oil into trans-
mission, and check carefully for oil leakage.
Refer to p. 13-25 for oil to be used and speci-
fied amount.
13-24