Suzuki Samurai 1986, Service Manual

Page: 280 / 482

Fig. 13-53
10) Install 3rd gear bearing, 3rd gear, high speed
synchronizer ring and hub/sleeve. When
installing hub, direct the side with larger
outer diameter boss to 3rd gear side. Then
fit circlip into groove in main shaft.
3rd ear
Fig. 13-54
Fig.
11) Install synchronizer ring, needle bearing and
input shaft.
Fig. 13-56
Counter Shaft and Reverse Idle Gear
1) Drive counter shaft front bearing into lower
case. Then using plastic hammer, drive
counter shaft into front bearing a little.
In the above state, using bearing installer
(special tool), drive center bearing onto
counter shaft and into lower case.
Bearing installer (D) (09925-18010)
1. Center bearing
2. Counter shaft
Fig. 13-57
3. Transmission lower case
4. Wood stand
13-18