Suzuki Samurai 1986, Service Manual

Page: 197 / 482

6. Thermostat
1)
Drain cooling system.
2) Disconnect thermostat cap from intake
manifold.
Fig.
3) Remove thermostat.
1. Crankshaft pulley
2. Crankshaft pulley bolt
3. Crank timing belt pulley bolt
Fig. 12
5) Remove timing belt outside cover.
Fig.
Fig. 13
7. Water Pump
1) Drain cooling system.
Refer to 1. Coolant draining on previous
2) Remove the radiator shroud and cooling
fan clutch at the same time.
Refer to item 4 on previous page.
3) Loosen water pump drive belt tension.
Then remove water pump pulley and pump
drive belt.
4) Remove crankshaft pulley by removing
4 pulley bolts. Crankshaft timing belt
pulley bolt at the center is needs not to be
loosened.
6-6