Suzuki Samurai 1986, Service Manual

Page: 307 / 482

4) Install the counter shaft thrust washer to
center case. For installation, apply ample
amount of grease to both faces of the washer
so as to lubricate sliding surfaces and prevent
it from moving out of place or slipping off
and bring its face without depressions against
center case, and fit its bent portion into
groove in case securely.
Fig.
5) Install needle roller bearings, spacer and
counter gear on counter shaft.
Fig. 14-55
6) Install output shaft assembly to center case.
Fig. 14-56
7) When installing front drive shift shaft and
reduction shift shaft in center case, install
spring
ball shaft ball shaft
ball spring and plug 8. in that
order.
Fig. 14-57
(1.8 3.0 kg-m
(13.5 21.5
8) Fit forks on shift shafts and lock them
with spring pins. Forks should be fitted in
correct direction
according to below figure.
Fig. 14-58
Fig. 14-54
Fig. 14-55
Fig. 14-58
Fig. 14-57
Fig. 14-56
14-19