Suzuki Samurai 1986, Service Manual

Page: 274 / 482

13-5. INSPECTION OF COMPONENTS
Gears
Check each part for wear, damage or discolora-
tion. Replace if found defective.
Fig. 13-31
Fig. 13-29
Synchronizer Hubs, Sleeves and Keys
Check each part for wear or damage. Replace if
found defective.
Fig.
Shift Forks and Sleeves
Check contact surfaces for wear or damage.
Measure clearance between fork and sleeve.
Maximum clearance
1.0 mm (0.039 in)
Main Shaft
Check each part of shaft for wear, discoloration
or damage. Replace shaft if any part is found
defective.
Fig. 13-32
Bearings and Bushes
Check each part for wear, damage or discolora-
tion. With ball bearing, check to ensure that it
rotates smoothly and it does not make noise.
Replace if found defective.
Fig. 13-33
13-12