Suzuki Samurai 1986, Service Manual

Page: 281 / 482

2) Fit counter shaft front circlip into groove in
shaft.
Fig.
Fig.
3) Install counter shaft reverse gear and 5th
gear onto counter shaft. And then drive
counter shaft rear bearing onto it.
Fig. 13-61
Fig.
4) Install idle gear and washer onto reverse
gear shaft and pin into it.
Install above as assembled into lower case
with pin and washer tongue aligned as
shown below.
Shifter Forks, Shafts and Yokes
[Forks and Shafts]
Fig. 13-62
Low speed shift shaft
High speed gear shift shaft
Reverse gear shift shaft
13-19