Suzuki Samurai 1986, Service Manual

Page: 283 / 482

Fig. 13-67
4) Install interlock ball in Fig. 1364) and
locating ball in Fig. 13-64) in upper case.
After installing interlock roller in Fig.
1364) in high speed gear shift shaft and
insert shaft into upper case as described in
2) and 3).
Fork should be installed in such direction as
shown in Fig. 13-68. Then drive shift yoke
pin until it becomes flush with outer surface
of fork.
Fig. 13-68
5) Install interlock ball in Fig. 1364) and
locating ball in Fig. 13-64) into upper
case. Then insert reverse gear shift shaft
into upper case as described in 2) and 3).
[Yokes]
1) Install low speed shift yoke as shown
below, using care for its direction.
Low speed ear shift yoke
Yoke pin
3
Yoke
\
Yoke pin
Reverse shift
5th gear select
lim spring
return spring
5th gear shift
Reverse gear shift yoke
lim yoke
Fig. 13-70
2) Install reverse gear shift yoke and 5th gear
shift yoke as shown below. Use care for
installing direction of each part.
Between 2 springs, shorter one is 5th select
return spring.
Low speed ear shift yoke
Yoke pin
3
Yoke
\
pin
Reverse gear shift
5th gear select
lim spring
return spring
5th gear shift
Reverse gear shift
lim yoke
Fig. 13-71
13-21