Suzuki Samurai 1986, Service Manual

Page: 68 / 482

6) Take down alternator and water pump
pulley.
Fig. Flywheel holder (Special tool
09924-17810)
Fig. 3-4-6
8) Remove outside cover on timing belt.
Fig. 3-4-7
7) Remove crankshaft pulley by removing 4
9) Loosen tensioner bolt and stud, and remove
pulley bolts, with special tool (A) hitched to belt from crank timing belt pulley and cam-
flywheel so that crankshaft will not turn. shaft pulley after pushing up tensioner
The crank timing belt pulley bolt at the plate fully by finger as shown in Figure
center needs not to be loosened. 3-4-l 1.
1. Crankshaft pulley
Fig. 3-4-8
2. Crankshaft pulley bolt
3. Crank timing belt pulley bolt
Fig.
Timing belt
2. Tensioner
3. Tensioner bolt
Fig.
4. Tensioner stud
3-10