Suzuki Samurai 1986, Service Manual

Page: 305 / 482

5) When shim thickness is determined, select
proper shim(s) from among the following
shims and use it (them) between input shaft
rear bearing and rear case when matching
center case and rear case.
Available shim 0.1, mm
size (thickness)
in.) I
[Output shaft]
Just as with input shaft, take measurements of
“A’ “B’ and “C’ as indicated in Fig.
14-48-1, calculate shim thickness and install
proper shim(s) between output shaft rear bearing
and rear case when matching center case and
rear case.
1. Shim for input shaft
2. Shim for output shaft
fig.
14-17
Fig. 14-48-2