1A-25 Engine General Information and Diagnosis:
8
Check ignition timing as follows:
1) Select “MISC” mode on SUZUKI scan tool and fix
ignition timing to initial one.
2) Using timing light, check initial ignition timing.
Is it 5
°
±
3
°
BTDC at specified idle speed?
Go to “Engine Symptom
Diagnosis”.
Check ignition control
related parts referring to
“Ignition Timing
Inspection in Section 1H
in related manual”.
9
Is immobilizer control system equipped?
Go to Step 10.
Go to Step 11.
10
Check immobilizer system malfunction as follows:
1) Check MIL (malfunction indicator lamp) for flashing.
Is it flashing when ignition switch is turned to ON position?
Go to “DTC Table in
Section 10C in related
manual”.
Go to Step 11.
11
Check fuel supply as follows:
1) Check to make sure that enough fuel is filled in fuel tank.
2) Turn ON ignition switch for 2 seconds and then OFF.
Is fuel pressure felt from fuel feed hose when ignition switch
is turned ON?
Go to Step 13.
Go to Step 12.
12
Check fuel pump for operating
Was fuel pump operating sound heard from fuel filler for
about 10 seconds after ignition switch ON and stop?
Go to “Fuel Pump and
Its Circuit Check”.
Step
Action
Yes
No
I2RH01110006-01
IYSW01110005-01
I2RH0B110017-01
Summary of Contents for Liana RH418
Page 4: ......
Page 222: ...3A 13 Drive Shaft Axle ...
Page 362: ...5A 136 Automatic Transmission Transaxle ...
Page 370: ...Prepared by 1st Ed Feb 2004 2nd Ed Jul 2006 367 ...