Suzuki Liana RH418, Supplementary Service Manual

Page: 311 / 371

Automatic Transmission/Transaxle: 5A-85
19) Remove valve body connector mounting bolt and
remove valve body connector and its harness.
20) Remove 2 gaskets (1).
NOTE
Never reuse removed gaskets.
21) Remove snap ring (1) using special tool.
Special tool
(A): 09900-06108
22) Pull out 2nd and 4th brake cover (2) with O-ring by
using pliers or the like.
23) Inspect 2nd and 4th brake piston rod stroke.
a) Set dial gauge and magnetic stand (special
tools).
Special tool
(A): 09900–20607
(B): 09900-20701
b) Plug oil hole (1).
c) Measure piston rod stroke while applying and
releasing compressed air (400 – 800 kPa, 4 – 8
kg/cm
2 , 57 – 113 psi) from oil hole (2).
2nd and 4th brake piston rod stroke
Standard: 1.78 – 2.22 mm (0.070 – 0.087 in.)
NOTE
If piston rod stroke exceeds the
specification, adjust piston rod or inspect
band assembly of 2nd and 4th brake for
damage, wear or discoloration.
24) Pull out reverse clutch assembly (1).
25) Remove 2nd and 4th brake band assembly (2).
26) Remove anchor pin (3).
I2RH01510108-01
I2RH01510109-01
I2RH01510110-01
I2RH01510111-01
I2RH01510112-01