1G-6 Fuel System:
8) Disconnect fuel filler hose (1) and breather hose (2)
from filler neck (3).
CAUTION
!
Never disconnect fuel filler hose (1) from fuel
tank inlet. If half or more of fuel is remaining
to fuel tank, fuel over flows in this case and
come out.
9) Due to absence of fuel tank drain plug, drain fuel
tank by pumping fuel out through fuel tank filler.
Use hand operated pump device to drain fuel tank.
CAUTION
!
• Do not force pump hose into fuel tank, or
pump hose may damage fuel tank inlet
valve.
• Never drain or store fuel in an open
container due to possibility of fire or
explosion.
10) Disconnect fuel pipe joints from fuel pipes.
For quick joint, disconnect it as follows:
a) Remove mud, dust and/or foreign material
between pipe and joint by blowing compressed
air.
b) Unlock joint (1) lock by inserting special tool
between pipe (2) and joint (1).
Special tool
(A): 09919-47020
c) Disconnect joint from pipe.
WARNING
!
A small amount of fuel may be released after
the fuel hose is disconnected. In order to
reduce the chance of personal injury, cover
the hose and pipe to be disconnected with a
shop cloth. Be sure to put that cloth in an
approved container when disconnection is
completed.
11) Support fuel tank (1) with jack (2) and remove its
mounting bolts.
12) Lower fuel tank a little to disconnect wire harness at
connector (1) and ground wire harness, then remove
fuel tank.
1
2
3
I2RH0B170020-01
2
1
I3RH0A170004-01
2
1
I2RH0B170021-01
I2RH0B170022-01
Summary of Contents for Liana RH418
Page 4: ......
Page 222: ...3A 13 Drive Shaft Axle ...
Page 362: ...5A 136 Automatic Transmission Transaxle ...
Page 370: ...Prepared by 1st Ed Feb 2004 2nd Ed Jul 2006 367 ...