Suzuki Liana RH418, Supplementary Service Manual

Page: 299 / 371

Automatic Transmission/Transaxle: 5A-73
Installation
1) Install shift solenoid valve-A (No.1) (1), shift solenoid
valve-B (No.2) (2) and TCC solenoid valve (3) in that
order.
Tightening torque
Shift solenoid bolt (a): 7.0 N·m (0.7 kgf-m, 5.0 lb-
ft)
Valve body bolt (b): 10 N·m (1.0 kgf-m, 7.5 lb-ft)
2) Install pressure control solenoid (1).
Tightening torque
Pressure control solenoid bolt (a): 7.0 N·m (0.7
kgf-m, 5.0 lb-ft)
3) Connect solenoid connectors by identifying wire
color.
Solenoid coupler: Wire color
Pressure control solenoid valve (1): Pink +
Brown
Shift solenoid valve-A (No.1) (2): White
Shift solenoid valve-B (No.2) (3): Black
TCC solenoid valve (4): Yellow
4) Install transmission fluid sensor (5) and sensor wire
to clamp.
5) Clean mating surface of A/T side cover and A/T
case.
6) Apply sealant to mating surface of A/T side cover
and A/T case by using a nozzle (1) as shown in
figure by such amount that its section is 1.5 mm
(0.059 in) in diameter.
“A”: Sealant 99000–31230
7) Install transaxle side cover (1).
NOTE
Apply sealant to 2 bolts (2).
“A”: Sealant 99000–31230
Tightening torque
Transaxle side cover bolt (a): 24 N·m (2.4 kgf-m,
17.5 lb-ft)
(a)
(b)
3
2
1
I2RH01510062-01
1
(a)
I2RH01510063-01
5
4
3
2
1
I2RH01510064-01
I2RH01510065-01
1
(a)
(a)
(a)
2, “A”, (a)
2, “A”, (a)
I2RH01510066-01