Suzuki Liana RH418, Supplementary Service Manual

Page: 347 / 371

Automatic Transmission/Transaxle: 5A-121
Installation
1) Apply A/T fluid to counter shaft RH thrust roller
bearing (1).
Counter shaft RH thrust roller bearing dimension
Outside diameter: 46.0 mm (1.81 in.)
Inside diameter: 32.5 mm (1.28 in.)
Thickness: 3.2 mm (0.13 in.)
2) Install counter shaft RH thrust roller bearing (1) to
transaxle housing.
3) Apply A/T fluid to outer surface of cylindrical roller
bearing.
4) Tap cylindrical roller bearing, using special tools.
Special tool
(A): 09924-74510
(B): 09944-88210
5) Tighten cylindrical roller bearing retainer (2) with
bolt.
Tightening torque
Cylindrical roller bearing retainer bolt (a): 13
N·m (1.3 kgf-m, 9.5 lb-ft)
6) Install transaxle lubrication tube (3) and clamp.
7) Tighten them with bolt.
Tightening torque
Lubrication tube clamp bolt (b): 5.5 N·m (0.55
kgf-m, 4.0 lb-ft)
8) Tighten oil reservoir plate (4) (with three magnets (5)
installed) with bolts.
Tightening torque
Oil reservoir plate bolt (c): 5.5 N·m (0.55 kgf-m,
4.0 lb-ft)
I2RH01510227-01
I2RH01510228-01
1. Cylindrical roller bearing
I2RH01510229-01