Suzuki Liana RH418, Supplementary Service Manual

Page: 341 / 371

Automatic Transmission/Transaxle: 5A-115
5) Stake new counter shaft driven gear lock nut (2),
using standard punch in combination with hammer.
NOTE
When staking counter shaft driven gear lock
nut (2), point a suitable staking tool (1)
toward differential drive pinion shaft (3) axis
center and stake lock nut securely, as shown
in the figure. (Poor staking may cause
abnormal noise.)
6) Apply A/T fluid to counter shaft LH thrust roller
bearing (1) and race.
Counter shaft LH thrust roller bearing dimension
Outside diameter: 66.0 mm (2.60 in.)
Inside diameter: 50.0 mm (1.97 in.)
Thickness: 2.7 mm (0.11 in.)
7) Place counter shaft LH thrust roller bearing (1) and
race to transaxle case.
8) Apply A/T fluid to counter shaft RH roller bearing
race.
9) Install counter shaft RH roller bearing race to
transaxle housing.
[A]: Correct [B]: Wrong [C]: Wrong
I3RH0B510034-01
I2RH01510213-01