Suzuki Liana RH418, Supplementary Service Manual

Page: 351 / 371

Automatic Transmission/Transaxle: 5A-125
24) Install brake cover (1) to transaxle case with snap
ring (2), using snap ring pliers.
Special tool
(A): 09900-06108
NOTE
It is best for the head section of piston rod (1)
to protrude from the inner side of transaxle
case approx. 2 – 3 mm (0.079 – 0.118 in.)
25) Apply A/T fluid to outer surface of three pins (1, 2, 3).
26) Insert three pins to transaxle case.
Pin Dimension
27) Apply A/T fluid to transaxle lubrication tube (1).
28) Install transaxle lubrication tube (1).
29) Tighten clamp with bolt.
Tightening torque
Lubrication tube clamp bolt (a): 5.5 N·m (0.55
kgf-m, 4.0 lb-ft)
30) Install 2nd and 4th brake band (1).
31) Install 1st and reverse clutch assembly (2).
32) Temporarily tighten bolts of oil pump body (1).
(1) (2) (3)
Outer diameter 8.0 mm
(0.31 in.)
10.0 mm
(0.39 in.) 12.0 mm
(0.47 in.)
Length 45.0 mm
(1.77 in.)
33.7 mm
(1.33 in.) 45.9 mm
(1.81 in.)
I2RH01510239-01
I2RH01510109-01
I2RH01510240-01
I2RH01510241-01
I2RH01510242-01
I2RH01510243-01
I2RH01510244-01