Suzuki Liana RH418, Supplementary Service Manual

Page: 308 / 371

5A-82 Automatic Transmission/Transaxle:
Automatic Transaxle Unit Disassembly
S3RH0B5106026
CAUTION
!
• Thoroughly clean transaxle exterior before
overhauling it.
• Keep working table, tools and hands clean
while overhauling.
• Use special care to handle aluminum parts
so as not to damage them.
• Do not expose removed parts to dust.
Keep them always clean.
1) Extract torque converter (1).
CAUTION
!
Remove torque converter as much straight
as possible. Leaning it may cause to damage
oil seal lip.
2) Measure starting torque of differential gear assembly
using special tool.
Special tool
(A): 09928-06050
Starting torque of differential assembly
0.8 – 1.4 N
⋅
m (0.08 – 0.14 kgf-m, 0.58 – 1.0 lb-ft)
NOTE
Record actual starting torque of differential
assembly for installation reference.
5. A/T fluid inlet pipe 26. Snap ring 47. Manual valve lever shaft
6. A/T fluid pipe union bolt (color: green) 27. Breather hose 48. Transmission range sensor
7. Gasket 28. VSS 49. Manual shift lever
8. Oil strainer
: Replace oil strainer when overhauling.
29. Oil reservoir plate 50. Valve body connector
9. Snap ring 30. Transaxle lubrication tube 51. Fluid filler tube
10. 2nd / 4th brake cover 31. Counter shaft RH thrust roller bearing 52. Fluid level gauge
11. O-ring 32. Counter shaft RH cylindrical roller bearing 53. 1st / reverse brake separator plate
12. Brake inner cover 33. Cylindrical roller bearing retainer 54. 1st / reverse brake friction plate
13. E-ring 34. Oil reservoir plate 55. 1st / reverse brake retaining plate
14. Brake piston 35. Counter shaft LH cylindrical roller bearing 56. Snap ring
15. Spring 36. Pawl shaft 57. Gasket
16. Rod washer 37. Torsion spring 58. Transaxle rear case
17. Piston rod 38. Spacer 59. Input shaft speed sensor
18. 2nd / 4th brake band assembly 39. Parking lock pawl bracket 60. A/T fluid pipe union bolt (color: silver)
19. Anchor pin 40. Parking lock pawl : Apply automatic transaxle fluid.
20. Transaxle case
: Apply sealant 99000-31230 to mating
surface.
41. Manual detent spring : Tightening torque
21. Transaxle side cover 42. Parking lock rod : Do not reuse.
I2RH01510096-01
1. Differential pinion shaft
2. Differential pinion
I2RH01510097-01