Suzuki GSX-R1000 2007, Service Manual

Page: 267 / 549

4-112 FI SYSTEM DIAGNOSIS
ECT SENSOR INSPECTION
The engine coolant temperature sensor is installed at the cylin-
der head. (
4-49)
ECT SENSOR REMOVAL AND INSTALLATION
• Remove the ECT sensor. ( 7-7)
• Install the ECT sensor in the reverse order of removal.
"
ECT sensor: 18 N·m (1.8 kgf-m, 13.0 lb-ft)
IAT SENSOR INSPECTION
The intake air temperature sensor is installed on the right side of
the air cleaner box. (
4-53)
IAT SENSOR REMOVAL AND INSTALLATION
• Remove the air cleaner box. ( 5-14)
• Remove the IAT sensor from the air cleaner box.
• Install the IAT sensor in the reverse order of removal.
"
IAT sensor: 3 N·m (0.3 kgf-m, 2.0 lb-ft)
AP SENSOR INSPECTION
The AP sensor is located under the front seat. ( 4-57)
AP SENSOR REMOVAL AND INSTALLATION
• Remove the AP sensor from the frame.
• Install the AP sensor in the reverse order of removal.
TO SENSOR INSPECTION
TO SENSOR REMOVAL AND INSTALLATION
The tip-over sensor is located in front of the battery case.
(
4-62)
• Lift and support the fuel tank. ( 5-3)
• Remove the TO sensor from the battery case.
• Install the TO sensor in the reverse order of removal.
NOTE:
When installing the TO sensor, the arrow mark
must be
pointed upward.