Suzuki GSX-R1000 2007, Service Manual

Page: 242 / 549

FI SYSTEM DIAGNOSIS 4-87
4) Disconnect the ECM couplers.
5) Measure the voltage between terminal
and ground.
ECM input voltage: Battery voltage
\
09900-25008: Multi-circuit tester set
09900-25009: Needle pointed probe set
W
Tester knob indication: Voltage ( )
Is the voltage OK?
“C42” (P01650) IG SWITCH CIRCUIT MALFUNCTION
INSPECTION
* Refer to the IGNITION SWITCH INSPECTION for details. (
9-41)
ECM coupler (Harness side)
1
(Black) (Gray)
YES
• Fuel pump related circuit malfanction.
• R/Bl wire open or shorted or poor terminal
connection.
• Power source of speedometer shorted to
ground or open.
• If the wire and connection are OK, intermittent
trouble or faulty ECM.
• Recheck each terminal and wire harness for
open circuit and poor connection.
• Replace the ECM with a known good one, and
inspect it again.
NO • Open or short circuit in the R/Bl wire.
DETECTED CONDITION POSSIBLE CAUSE
Ignition switch signal is not input to the ECM. • Ignition system circuit open or short
• ECM malfunction
When the ID agreement is not verified.
ECM does not receive communication signal from the
immobilizer antenna.
(For E-02, 19, 24)
• Immobilizer system malfunction
(For E-02, 19, 24)