ENGINE 3-89
• Install the starter clutch cover and tighten the bolts.
NOTE:
* Fit a new gasket washer to the bolt
$
.
"
Starter clutch cover bolt: 10 N·m (1.0 kgf-m, 7.0 lb-ft)
• Install the starter idle gear No.1 shaft
, thrust washer
,
bearing
, starter idle gear No.1
, washer
, and spring
washer
.
• Install the dowel pins and new gasket
"
.
• Install the starter idle gear cover and tighten its bolts to the
specified torque.
"
Starter idle gear cover bolt: 10 N·m (1.0 kgf-m, 7.0 lb-ft)
NOTE:
Fit a new gasket washer to the bolt
%
.
Use a new gasket washer to prevent oil leakage.
Use a new gasket to prevent oil leakage.
Use a new gasket washer to prevent oil leakage.
Summary of Contents for GSX-R1000 2007
