Suzuki GSX-R1000 2007, Service Manual

Page: 136 / 549

3-86 ENGINE
• Install the generator rotor onto the crankshaft.
• Hold the generator rotor with the special tool and tighten its
bolt to the specified torque.
\
09930-44520: Rotor holder
"
Generator rotor bolt: 120 N·m (12.0 kgf-m, 87.0 lb-ft)
GENERATOR COVER
• Apply bond lightly to the mating surfaces at the parting line
between the upper and middle crankcases as shown.
D
99000-31140: SUZUKI BOND “1207B” or equivalent
• Install the dowel pins and new gasket .
• Install the generator cover and tighten the generator cover
bolts to the specified torque.
"
Generator cover bolt: 10 N·m (1.0 kgf-m, 7.0 lb-ft)
#
NOTE:
* Fit the gasket washers to the bolts
"
.
* Fit the clamp to the bolt
#
.
Use a new gasket to prevent oil leakage.
Be careful not to pinch finger between the generator
cover and crankcase.
Use new gasket washers to prevent oil leakage.