Suzuki GSX-R1000 2007, Service Manual

Page: 180 / 549

FI SYSTEM DIAGNOSIS 4-25
NOTE:
The above form is a standard sample. The form should be modified according to conditions and characteris-
tics of each market.
VISUAL INSPECTION
• Prior to diagnosis using the mode select switch or SDS, perform the following visual inspections. The rea-
son for visual inspection is that mechanical failures (such as oil leakage) cannot be displayed on the
screen with the use of mode select switch or SDS.
* Engine oil level and leakage ( 2-12)
* Engine coolant level and leakage ( 2-18)
* Fuel level and leakage ( 2-14 and 9-32)
* Clogged air cleaner element ( 2-4)
* Battery condition ( 9-42)
* Throttle cable play ( 2-15)
* Vacuum hose looseness, bend and disconnection
* Broken fuse
* FI indicator light operation (
4-17 and 9-30)
* Each warning light operation ( 9-30)
* Speedometer operation ( 9-33)
* Exhaust gas leakage and noise ( 2-29)
* Each coupler disconnection
* Clogged radiator fins (
7-4)
MOTORCYCLE/ENVIRONMENTAL CONDITION WHEN PROBLEM OCCURS
Environmental condition
Weather Fair Cloudy Rain Snow Always Other
Temperature Hot Warm Cool Cold ( °C/ °F) Always
Frequency Always Sometimes ( times/ day, month) Only once
Under certain condition
Road Urban Suburb Highway Mountainous ( Uphill Downhill)
Tarmacadam Gravel Other
Motorcycle condition
Engine condition Cold Warming up phase Warmed up Always Other at starting
Immediately after start Racing without load Engine speed ( r/min)
Motorcycle con-
dition During driving: Constant speed Accelerating Decelerating
Right hand corner Left hand corner
At stop Motorcycle speed when problem occurs ( km/h, mile/h)
Other