Suzuki GSX-R1000 2007, Service Manual

Page: 78 / 549

3-28 ENGINE
CRANKSHAFT
• Remove the O-ring .
• Loosen the bearing cap bolts by using 10 mm, 12 point socket
wrench, and tap the bearing cap bolts lightly with plastic ham-
mer to remove the bearing cap.
• Remove the crankshaft and thrust washers .
PISTON AND CONROD
• Push the conrod to cylinder head side and remove the piston
and conrod from the upper crankcase.
• Remove the piston pin circlip .
• Separate the piston and conrod by driving out the piston pin.
NOTE:
Scribe the cylinder number on the piston head.
Be careful not to damage the cylinder wall by the con-
rod.