Suzuki GSX-R1000 2007, Service Manual

Page: 251 / 549

4-96 FI SYSTEM DIAGNOSIS
Step 3
1) Turn the ignition switch OFF.
2) Check the continuity between Y wire and ground.
EXCVA position sensor continuity:
∞ Ω
(Infinity)
3) If OK, then measure the EXCVA position sensor resistance.
4) Connect the EXCVA position sensor coupler.
5) Set the EXCVA to adjustment position. (
6-4)
6) Disconnect the EXCVA position sensor coupler and measure
the resistance. (between Y and W wires)
EXCVA position sensor resistance at adjustment
position: Approx. 3.1 k
Ω
( Y – W)
\
09900-25008: Multi circuit tester set
V
Tester knob indication: Resistance (
Ω
)
Is the resistance OK?
3
3
YES Go to Step 4.
NO Replace the EXCVA with a new one.
3