Strautmann Giga-Vitesse CFS 3602, Operating Instructions Manual

Page: 122 / 327

Commissioning
Giga-Vitesse CFS 3602 - 4402, Giga-Vitesse CFS 3602 DO - 4402 DO 03.18 122
5.13.1.2 Draw pin (Piton-Fix) and drawbar lug (hitch ring)
1. Secure the machine against rolling.
2. Remove the holding-down device (cross bolt) above the draw pin.
3. Lower the supporting leg to support position such that the drawbar lug disengages from the
draw pin.
4. Move the tractor forward (approx. 25 cm).
5. Secure the tractor against accidental starting and rolling.
6. Fix and secure the holding-down device (cross bolt) above the draw pin.
7. Disconnect the supply lines.
8. Place the supply lines onto the hose holder.
9. Move the tractor forward.
5.13.1.3 Ball-type coupling and shell
1. Secure the machine against rolling.
2. Unlock the holding-down device at the bearing block.
3. Swivel the holding-down device to coupling position.
4. Lower the supporting leg to support position such that the shell disengages from the ball head.
5. Move the tractor forward.
6. Secure the tractor against accidental starting and rolling.
7. Lock and secure the holding-down device at the bearing block.
8. Disconnect the supply lines.
9. Place the supply lines onto the hose holder.
5.13.2 Disconnect hydraulic hose pipes
1.

Depressurise hydraulic system.

Relieve the hydraulic cylinders by means of the respective operating levers at the control device
or the corresponding key on the control set at the tractor or swivel them to floating position.
2.

Unlock the hydraulic plugs from the hydraulic sleeves.
3.

Use the dust caps to protect the hydraulic plugs and the hydraulic sockets against soiling.
4.

Place the hydraulic hose pipes onto the hose holder.