Strautmann Giga-Vitesse CFS 3602, Operating Instructions Manual

Page: 233 / 327

Service and maintenance of machine
233 Giga-Vitesse CFS 3602 - 4402, Giga-Vitesse CFS 3602 DO - 4402 DO 03.18
Every 500 service hours or once a year
•
Check frame and drawbar for cracks.
•
Clean the filter elements of the compressed-air brake system depending on the operating
conditions.
•
Have the hydraulic hose pipes checked for their operational safety by an expert.
•
Check the hydraulic filter for contamination (observe the cleaning indicator!).
•
Read out the fault memory of the electro-hydraulic forced steering axle system SES and have
malfunctions remedied by an authorised workshop.
•
Change the gear lubricant oils.
•
Lubricate the chain tensioner screws of the transport floor.
•
Carry out maintenance work on the cam-type cut-out clutch.
Every 2 years
•
Have the hydraulic oil changed and the return-flow and pressure filter elements replaced by an
authorised workshop.
Before longer downtimes
•
Thoroughly clean the machine.
•
Lubricate and grease the machine (the piston rods of the hydraulic cylinders as well).
•
Touch up paintwork.
Before winter period
•
Lubricate the transport floor chains to prevent them from freezing.
After end of season
•
Remove all cutting knives.
•
Grease or lubricate all movable parts of the cutting unit and the machine.