Strautmann Giga-Vitesse CFS 3602, Operating Instructions Manual, Page: 209 / 327

Operation
209 Giga-Vitesse CFS 3602 - 4402, Giga-Vitesse CFS 3602 DO - 4402 DO 03.18
Display in case of trouble
A malfunction of the steering system (active error) is displayed at the control set by means of acoustic
and visual signals.
•
A beep is emitted for 3 seconds.
•
The green control lamp "Steering axle locked" on the control set is flashing.
Check the steering computer in this case.
The main menu of the steering computer displays the error in encoded manner.
Display Meaning
Error message (example). The steering computer reports an
active error, i.e. a currently existing malfunction.
This display has priority over all other displays of the main menu.
In most cases, the display remains active until the error has been
remedied and the steering system has been restarted.
In case of several active errors, the 3-part error codes are
alternately displayed in the second line.
The error codes are permanently saved in the fault memory.
If the control set reports an error, immediately stop the machine and
contact the Strautmann customer service at +49 (0) 5424 802-0.
Tell the Strautmann customer service
•
the 3-part error code,
•
the vehicle/machine ID number (17-digit, see type plate).
Press the ENTER key (for at least 2 seconds) to switch over from the main menu to the selection of
the service menus.
Usually, the service menus only have to be called up to read out the fault memory or to indicate the
service hours.