Strautmann Giga-Vitesse CFS 3602, Operating Instructions Manual

Page: 142 / 327

Operation
Giga-Vitesse CFS 3602 - 4402, Giga-Vitesse CFS 3602 DO - 4402 DO 03.18 142
As soon as the p.t.o. shaft is switched
on, the beaters start to run and after a
short delay, the transport floor
automatically starts.
With the beaters powered, the
"Beaters On" symbol appears.
With the transport floor
powered, the "Feed On" symbol
is permanently lit.
6.1.3.7 Switch automatic charging system on/off
Switch the automatic charging system on for uniform and complete
filling of the cargo space.
The automatic charging system:
•
has to be switched on only once,
•
automatically and infinitely variably switches the transport floor
on and off during charging,
•
will automatically be deactivated if the control set generates the
acoustic signal (horn sound) and the visual signal "Forage
wagon full",
•
will automatically be activated if the machine has been emptied
and the pick-up is lowered the next time,
•
remains switched on until the automatic charging system is
manually switched off,
•
permits to pre-select the filling degree of the loaded material in
the cargo space.
The higher the set filling degree, the higher the transport floor feed
rate and the smaller the filling capacity.
1. Press the key once.
The automatic charging system is
switched on. The "Automatic charging
system on" symbol appears.
The screen shows:
2. Press the key again.
The automatic charging system is
switched off. The "Automatic charging
system off" symbol appears.
The screen shows: