Strautmann Giga-Vitesse CFS 3602, Operating Instructions Manual

Page: 226 / 327

Use of machine
Giga-Vitesse CFS 3602 - 4402, Giga-Vitesse CFS 3602 DO - 4402 DO 03.18 226
7.4.2.2 Machine equipped with beaters
WARNING Risk of being drawn in and becoming entangled within the area
of powered beaters when opening and closing the tailgate and
when discharging the machine!
Make sure that people leave the swivelling range of the tailgate
before pressing the keys
,
or .
•
Press the keys
,
or only with the tractor's
p.t.o. shaft stopped!
Instead of the desired function, the warning message PTO
is displayed to prevent damage to the angular
switchgear for coupling the powertrain to the beaters.
•
Reduce the feed rate for the transport floor during discharge if
the control set frequently generates the acoustic and visual
signal "Forage wagon full"!
The beaters may become clogged if the feed rate for the
transport floor is not reduced.
1.

Press the key once to switch the Discharge Mode on.

The folding drawbar moves to the preset discharge position.

The steering axle is locked.
2.

Move onto the clamp silo.
3.

Press the key briefly when being on the clamp silo.
The following functions will automatically be carried out one after the other:

Lift tailgate until the first set opening width is reached.

Switch gearboxes and clutches. Pick-up and CFS drum are switched off.

Switch transport floor to standby mode when the tailgate has reached its end position.
The "Feed On" symbol is flashing on the control set.
4.

Switch the tractor's p.t.o. shaft on.
5.

Let the tractor's p.t.o. shaft smoothly start to run such that the beaters are able to loosen
themselves.

The beaters start to run and after a short delay, the transport floor automatically starts.

Switch the tractor's p.t.o. shaft immediately off if the slip clutch responds..

Press the soft key to switch the transport floor feed off.