Strautmann Giga-Vitesse CFS 3602, Operating Instructions Manual

Page: 168 / 327

Operation
Giga-Vitesse CFS 3602 - 4402, Giga-Vitesse CFS 3602 DO - 4402 DO 03.18 168
6.2.3.2 Switch road travel mode on
The road travel mode can only be
switched on:
•
with lifted pick-up (attention, the
pick-up is not checked for
having been completely lifted),
•
with closed tailgate,
•
with the transport floor
stationary,
•
with the beaters stationary.
If these requirements are not fulfilled,
a short beep is emitted, a
corresponding warning message and
the non-fulfilled requirement appear in
the menu:
(1)

Warning message
(2)

Pick-up down
(3)

Beaters powered
(4)

Tailgate open
The screen shows:
With the road travel mode switched on:
•
the Road Travel menu appears,
•
apart from the functions "Lock steering axle" and "Unlock
steering axle", all functions of the control set are disabled,
•
the hydraulic drawbar suspension (optional extra), the axle
suspension of the hydro-pneumatic tandem chassis (optional
extra) and the warning beacon (optional extra) are switched on,
•
the folding drawbar moves to the position saved for road travel,
•
the steering axle is locked if this function has been activated in
the machine set-up menu for road travel,
•
the work lights (optional extra) are switched off.
If the folding drawbar is equipped with a drawbar suspension, the
hydraulic cylinders of the folding drawbar must be extended by
approx. 20 mm before switching the road travel mode on.
The drawbar suspension will not work if the folding drawbar is
lowered to its end position.