Strautmann Giga-Vitesse CFS 3602, Operating Instructions Manual, Page: 171 / 327

Operation
171 Giga-Vitesse CFS 3602 - 4402, Giga-Vitesse CFS 3602 DO - 4402 DO 03.18
6.2.3.5 Switch automatic discharge mode on (Machine without beaters)
The automatic discharge mode is automatically switched off if the
tailgate is lowered.
1.

Press the key once when being on
the clamp silo.
The following functions will automatically
be carried out one after the other:
•
Lift tailgate
•
Switch transport floor on when the tailgate
has reached its end position.
The screen shows:
6.2.3.6 Switch automatic discharge mode on (machine equipped with beaters)
The automatic discharge mode is automatically switched off if the
tailgate is lowered (only possible with the p.t.o. shaft switched off).
Switch the p.t.o. shaft off or use the
soft key to discharge step by step.
The beaters and the transport floor stop. The transport floor
automatically switches to standby mode.
1. Press the key once when being on
the clamp silo.
The following functions will automatically
be carried out one after the other:
•
Lift tailgate until the set first opening
width is reached.
•
Switch gearboxes and clutches.
•
Switch transport floor to standby
mode when the tailgate has reached
its set first opening width.
2.

Switch the p.t.o. shaft on.
The screen shows: