Strautmann Giga-Vitesse CFS 3602, Operating Instructions Manual

Page: 291 / 327

Service and maintenance of machine
291 Giga-Vitesse CFS 3602 - 4402, Giga-Vitesse CFS 3602 DO - 4402 DO 03.18
7.

Hold the operating element at the tractor's
control device in "Lift" position
•
until the distance X = 600±10 mm or
•
until the lower edge of the protective
tube (8) is within the upper, wide
marking (9).
The lower, narrow marking (10)
should be reached with the machine
being fully charged.
8.

Set the operating element for the levelling
valve at the tractor's control device to
floating position.
9.

Turn the lower stop-cock (3) back to
horizontal position.
10.

Repeat steps 5 to 9 for the other vehicle
side.
Fig. 166
8.17.6 Adjust travelling height via easy-to-use block
Optional extra
Depending on the tyres and extensions used, the vehicle height may
significantly vary.
Make sure not to exceed the admissible vehicle height (in Germany:
4 m) when setting the travelling height!
•
The travelling height is adjusted on firm, even ground via the
levelling valve with the machine being empty.
•
The travelling heights of the right-hand and left-hand machine
side are separately set. The procedure for setting the travelling
height is the same on both machine sides.
•
For safety reasons, the machine lowers only slowly.