Strautmann Giga-Vitesse CFS 3602, Operating Instructions Manual

Page: 249 / 327

Service and maintenance of machine
249 Giga-Vitesse CFS 3602 - 4402, Giga-Vitesse CFS 3602 DO - 4402 DO 03.18
8.10.2 Clean cutting unit
Use compressed air to clean the knife protection system of the
cutting knives every day!
A soiled cutting unit leads to worse response characteristics of the
knife protection system.
These measures will support easier removal and reinstallation of the
cutting knives:
•
Use compressed air to clean the retainer of the cutting knives
before removing them.
•
Use compressed air to clean the slots of the cutting knives
before reinstalling them.
1. Daily clean:

the gaps (1) between the cutting
knives/knife holders.

the lever pockets (2) of the individual
knife holders.
Use the mounting lever (3) and
compressed air for this purpose.
2. Lubricate the roller (4) in the lever pocket
of the individual knife holders several times
during the season. Check the smooth
running of the rollers during that procedure
as follows:

Take off the spring (5) at the outer
ring (6) of the knife holder by means
of the mounting lever.

The lever pocket falls down and the
roller can be accessed.
Fig. 104