Safety instructions
Giga-Vitesse CFS 3602 - 4402, Giga-Vitesse CFS 3602 DO - 4402 DO 03.18
72
Welding, soldering, drilling or other work on hydraulic accumulators which might affect the
mechanical properties is not allowed.
•
Risk due to leaking hydraulic oil!
This risk may cause serious injuries due to slipping.
Immediately remove fresh oil stains by means of binding agents.
Dispose of hydraulic oil according to regulations. Contact your oil supplier in case of disposal
problems.
Beware that no hydraulic oil penetrates the soil or water.
3.4.4
Electrical system
•
Always disconnect the battery (minus pole)/control unit when carrying out work on the electrical
system!
•
Do not connect any additional electrical loads to the control set.
Additional electrical loads are e.g. a silage additive pump or additional lighting (more than
2 lamps).
For additional loads, we offer an additional control which triggers these additional loads
via LIN module/control unit.
•
Only use the specified fuses. When using too big fuses, the electrical system may be destroyed
– risk of fire!
•
Ensure proper connection of the battery:
Connection: First connect the plus pole, then the minus pole
Disconnection: First disconnect the minus pole, then the plus pole
•
Always cover the plus pole of the battery as required. Risk of explosion in case of accidental
ground!
•
Risk of explosion! Avoid sparking and open fire in the vicinity of the battery!
•
The machine can be equipped with electronic components and parts, the functioning of which
may be affected by electromagnetic emissions of other devices. Such interferences may be a
risk to people if the following safety instructions are not observed.
In case of a retrofitting of electrical devices and/or components into the machine and their
connection to the on-board electrical system, the user must check on his own
responsibility whether the retrofitted parts interfere with the vehicle electronics or other
components.
Ensure that the retrofitted electrical and electronic components comply with the EMC
directive 2014/30/EU as amended from time to time and bear the CE symbol.
Summary of Contents for Giga-Vitesse CFS 3602
