Strautmann Giga-Vitesse CFS 3602, Operating Instructions Manual

Page: 214 / 327

Use of machine
Giga-Vitesse CFS 3602 - 4402, Giga-Vitesse CFS 3602 DO - 4402 DO 03.18 214
7.1 Transport journeys
•
Additionally observe the information in the following chapters
when carrying out transport journeys:

"Safety instructions for the operator"

"Basic safety instructions"
•
Before carrying out transport journeys, check

the supply lines for proper connection,

the lighting system for damage, proper functioning and
cleanliness,

the brake and hydraulic system for visible defects,

whether the parking brake has been completely
released,

the brake system for proper functioning.
WARNING Risk of dangerous travelling situations due to accidental
actuation of hydraulic functions during transport journeys!
Switch the Road Travel Mode on before carrying out transport
journeys.
The covering system (optional extra) must be closed during
transport journeys.
Observe the fact that the braking axle needs to run in during the first
service hours
– the brake lining is adjusting to the brake drum. Full
braking power is only reached after this running-in period.
Check the brake system for proper functioning before carrying out
transport journeys.
If the folding drawbar is equipped with a drawbar suspension, the
hydraulic cylinders of the folding drawbar must be extended by
approx. 20 mm before switching the road travel mode on.
The drawbar suspension will not work if the folding drawbar is
lowered to its end position.
1.

Lower the lift axle completely if available.

Only with the lift axle completely lowered is the ALB regulator able to properly control the
required braking force.
2.

Deactivate the automatic charging system and close the front panel.
3.

Activate the Road Travel Mode on your control set.

With the Road Travel Mode switched on:

the Road Travel menu appears,