Strautmann Giga-Vitesse CFS 3602, Operating Instructions Manual

Page: 267 / 327

Service and maintenance of machine
267 Giga-Vitesse CFS 3602 - 4402, Giga-Vitesse CFS 3602 DO - 4402 DO 03.18
1.

Align the chains of the transport floor such
that the chain connecting links are within
the central and rear area of the cargo
space.
2.

Secure tractor and machine against
accidental starting and rolling.
3. Tighten the respective nut (2) to loosen the
respective pawl (1) of the chain tensioners.
4.

Unscrew the counter nuts (3) of the
clamping screws (4).
5.

Turn the 4 clamping screws
counterclockwise.
The chain tension is released and the
chains sag.
6.

Enter the cargo space through the access
door to shorten the chains.
7.

Open and remove the chain connecting
links.
8.

Always cut out an even number of chain
links (2, 4, 6) at all chains by means of a
right-angle grinder.
9.

Put the shortened chains together by
means of new chain connecting links.
Fig. 132
10.

Turn the 4 clamping screws clockwise.
The chains are tightened.
11.

Unscrew the nuts of the pawls.
12.

Check the screw-in depth of the clamping screws. The transport floor springs must always be
tensioned to maximum. All clamping screws must have the same screw-in depth.
13.

Tighten the counter nuts.
14.

Close the access door.
15.

Fold the ladder up.
16.

Lock the ladder and the access door by means of the locking mechanism.