Strautmann Giga-Vitesse CFS 3602, Operating Instructions Manual

Page: 293 / 327

Service and maintenance of machine
293 Giga-Vitesse CFS 3602 - 4402, Giga-Vitesse CFS 3602 DO - 4402 DO 03.18
8.17.7 Adjust travelling height (tridem chassis)
Depending on the tyres and extensions used, the vehicle height may
significantly vary.
Make sure not to exceed the admissible vehicle height (in Germany:
4 m) when setting the travelling height!
1.

Hitch the machine to the tractor.
2.

Park the tractor and the empty machine on
even ground.
3.

Secure tractor and machine against
accidental starting and rolling.
Ensure that the brakes of the
machine are not applied.
4.

Connect the hydraulic hose pipe of the
chassis with a single-acting control device
of the tractor.
5.

Lower the lift axle.
6.

Hold the operating element for the
travelling height adjustment at the tractor's
control device in "Lift" position until the
levelling valves (1) have lifted or lowered
the chassis to the correct travelling height.
7.

Set the operating element at the tractor's
control device to floating position for
approx. 10 seconds to ensure that the
piloted check valves of the levelling valves
can close.
Fig. 169