Strautmann Giga-Vitesse CFS 3602, Operating Instructions Manual

Page: 229 / 327

Service and maintenance of machine
229 Giga-Vitesse CFS 3602 - 4402, Giga-Vitesse CFS 3602 DO - 4402 DO 03.18
8 Service and maintenance of machine
Regular and proper service and maintenance:
•
will keep your machine ready for use for a long time and avoid early wear,
•
will reduce downtimes and repairs,
•
is a precondition for our warranty provisions.
•
When carrying out service and maintenance work on the
machine, additionally observe the information included in the
following chapters:

"Operator's obligation"

"Training of staff"

"Warning and instruction signs"

"Safety instructions for the operator"
•
The time intervals, service hours and maintenance intervals
specified in the enclosed sub-supplier documentation shall
prevail.
•
Carry out the maintenance intervals according to the time limit
reached first.
•
Observe the maintenance intervals for wearing parts!
•
Always disconnect all electrical/electronic plug connections to
the tractor before carrying out service and maintenance work
on the machine.
•
Check brake lines, air pipes and hydraulic hose pipes with
special care for visible defects!
•
Relubricate all lubrication points after cleaning the machine by
means of pressure washers.
•
Special know-how is required for carrying out testing and
maintenance work. This know-how is not imparted by these
operating instructions.
•
The maintenance intervals depend on the frequency of use of
your machine. The maintenance plan has been tailored to
medium axle loads and stress exerted on the brakes.
In case of higher loads and amount of stress, maintenance
work must be carried out at respectively shorter intervals. This
shall in particular apply to the brakes and chassis.
•
Modifications to the maintenance instructions shall be
reserved!