GasLab Q2 displays and operating the device
7
GasLab Q2
G a s Q u a l i t y A n a l y z e r
Page 61 of 135
For the non-logged-in or logged-in users, without the right to change the device time, the display
"
Time Service Time Synchronization
" opens as second display after "
Date & Time
" has been
activated.
Figure 7.21: Time Service Time Synchronization
Time synchronization by:
insert the seconds in the field at which the system time
should be changed.
Next possible synchronization:
displays the next possible time for further synchro-
nization. Calculation takes place after a synchro-
nization based on the parameter
“Synchronization
Interval
”
Expected new time:
in this line, the time service continuously calculates the
new system time
Synchronize now:
with this action (if selectable), the expected new time
will be used as system time.
For the logged on user, with right to change the device time, the display
“
Date & Time”
opens as
a second display after activation "
Date & Time
".
The type of representation or the order of the display (parameterizable
See chapter 8) depents
on language and time stamp format. See the following examples
:
Figure 7.22: Display Time Service Date & Time with different time stamp formats
The “
Date & Time
display enables action to set the system time and to make the selection for
the application of (DST) daylight saving time
More information about these displays and the functions
See chapter 7.3.9.
